Polymer Physics seminars

Nonlinear behaviour in viscoelastic polymer liquids can generate flow instabilities even at low Reynolds number. Jonas Tegenfeldt examines how composition and channel geometry control concentration waves, mixing and asymmetric flow. Opposing fluidic diodes in a T-junction split Newtonian flow but bias viscoelastic liquids; disrupting DNA with detergent restores an unbiased split. A bridge arrangement rectifies flow and detects dilute polyethylene oxide at approximately 10 ppm using microlitre volumes, enabling sensitive microrheometry. These experiments use fluid–structure interactions to encode control in channel geometry, reducing reliance on external sensors and valves, with prospects for autonomous microfluidics, wearables and soft robotics.

Mechanochemical recycling uses collisions in ball mills to create reactive environments within solid plastic feedstocks. Carsten Sievers examines how these environments enable depolymerization and where they impose kinetic and thermodynamic limits. For PET milled with sodium hydroxide, reaction rates depend on interfaces between reactants. Raman microscopy, focused-ion-beam transmission electron microscopy, small-angle X-ray scattering and material-point simulations characterize individual impact craters. Amorphous regions react above a minimum impact force, whereas crystalline regions require impacts exceeding PET’s yield point. Milling polystyrene produces styrene at steady rate and selectivity alongside minor products, including oxygenates. Removing monomer continuously prevents repolymerization, while thermodynamic analysis identifies limits on olefin release from chain-end radicals and motivates more energetic, longer-lived reaction environments. Coupling chain cleavage to hydrogenation or oxidation provides another driving force. An example uses hydrogen peroxide and an iron-oxide catalyst during polyethylene milling, producing oxidation at positions along the backbone followed by carbon-carbon bond cleavage.

Richard Huang investigates how DNA nanostructures deform under uneven hydrodynamic forces, a question relevant to drug delivery, vaccines and biosensors. Coarse-grained molecular dynamics and mechanical models first examine linear and circular DNA in extensional flow. Drag concentrates tension near the middle of linear duplexes, disrupting base pairs and causing overstretching. Deforming minicircles straighten along their sides while concentrating bending into opposing tips and localized kinks. Models based on DNA elasticity and hydrodynamic-force distributions explain these responses, then extend to wireframe DNA origami to study force transmission and how local structural transitions produce whole-particle deformation. The results inform structures designed for stability or controlled deformation in flow. Online via Zoom. Friday 2 October 2026, 12:00–13:00 EDT (America/New_York; UTC−4). Open the Zoom link on the official event page; the audience explicitly includes the public. Richard Huang is affiliated with MIT. Organized by MIT Department of Mathematics — Computational Research in Boston and Beyond Seminar.

Networks of stiff biopolymers are an omnipresent structural motif in cells and tissues. A prominent modeling framework for describing biopolymer network mechanics is rigidity percolation theory. This theory describes model networks as nodes joined by randomly placed, springlike bonds. Increasing the amount of bonds in a network results in an abrupt, dramatic increase in elastic moduli above a certain threshold – an example of a mechanical phase transition. While homogeneous networks are well studied, many tissues are made of disparate components and exhibit spatial fluctuations in the concentrations of their constituents. In this talk, I will first discuss recent work in which we explained the structural basis of the shear mechanics of healthy and chemically degraded cartilage by coupling a rigidity percolation framework with a background gel. Our model takes into account collagen concentration, as well as the concentration of peptidoglycans in the surrounding polyelectrolyte gel, to produce a structureproperty relationship that describes the shear mechanics of both sound and diseased cartilage. I will next discuss the introduction of structural correlation in constructing networks, such that sparse and dense patches emerge. I find moderate correlation allows a network to become rigid with fewer bonds, while this benefit is partly erased by excessive correlation. We explain this phenomenon through analysis of the spatial fluctuations in strained networks’ displacement fields. Finally, I will address our work’s implications for non-invasive diagnosis of pathology, as well as rational design of prostheses and novel soft materials.

Self-organization is a universal concept spanning numerous disciplines including mathematics, physics and biology. Chromosomes are self-organizing polymers that fold into orderly, hierarchical and yet dynamic structures. In the past decade, advances in experimental biology have provided a means to reveal information about chromosome connectivity, allowing us to directly use this information from experiments to generate 3D models of individual genes, chromosomes and even genomes. In this talk I will present a novel data-driven modeling approach and discuss a number of possibilities that this method holds. I will discuss a detailed study of the time-evolution of X chromosome inactivation, highlighting both global and local properties of chromosomes that result in topology-driven dynamical arrest and present and characterize a novel type of motion we discovered in knots that may have applications to nanoscale materials and machines.

Chromosomes are extremely long, active polymers that are spatially organized across multiple scales to promote cellular functions, such as gene transcription and genetic inheritance. During each cell cycle, chromosomes are dramatically compacted as cells divide and dynamically reorganized into less compact, spatiotemporally patterned structures after cell division. These activities are facilitated by DNA/chromatin-binding protein motors called SMC complexes. Each of these motors can perform a unique activity known as “loop extrusion,” in which the motor binds the DNA/chromatin polymer, reels in the polymer fiber, and extrudes it as a loop. Using simulations and theory, I show how loop-extruding motors can collectively compact and spatially organize chromosomes in different scenarios. First, I show that loop-extruding complexes can generate sufficient compaction for cell division, provided that loop-extrusion satisfies stringent physical requirements. Second, while loop-extrusion alone does not uniquely spatially pattern the genome, interactions between SMC complexes and protein “boundary elements” can generate patterns that emerge in the genome after cell division. Intriguingly, these “boundary elements” are not necessarily stationary, which can generate a variety of patterns in the neighborhood of transcriptionally active genes. These predictions, along with supporting experiments, show how SMC complexes and other molecular machinery, such as RNA polymerase, can spatially organize the genome. More generally, this work demonstrates both the versatility of the loop extrusion mechanism for chromosome functional organization and how seemingly subtle microscopic effects can emerge in the spatiotemporal structure of nonequilibrium polymers.

While the motion and collective behavior of cells are well-studied on flat surfaces or in unconfined liquid media, in most natural settings, cells thrive in complex 3D environments. Bioprinting processes are capable of structuring cells in 3D and conventional bioprinting approaches address this challenge by embedding cells in bio-degradable polymer networks. However, heterogeneity in network structure and biodegradation often preclude quantitative studies of cell behavior in specified 3D architectures. Here, I will present a new approach to 3D bioprinting of cellular communities that utilizes jammed, granular polyelectrolyte microgels as a support medium. The self-healing nature of this medium allows the creation of highly precise cellular communities and tissue-like structures by direct injection of cells inside the 3D medium. Further, the transparent nature of this medium enables precise characterization of cellular behavior. I will describe two examples of my work using this platform to study the behavior of two different classes of cells in 3D. First, I will describe how we interrogate the growth, viability, and migration of mammalian cells—ranging from epithelial cells, cancer cells, and T cells—in the 3D pore space. Second, I will describe how we interrogate the migration of E. coli bacteria through the 3D pore space. Direct visualization enables us to reveal a new mode of motility exhibited by individual cells, in stark contrast to the paradigm of run-and-tumble motility, in which cells are intermittently and transiently trapped as they navigate the pore space; further, analysis of these dynamics enables prediction of single-cell transport over large length and time scales. Moreover, we show that concentrated populations of E. coli can collectively migrate through a porous medium—despite being strongly confined—by chemotactically “surfing” a self-generated nutrient gradient. Together, these studies highlight how the jammed microgel medium provides a powerful platform to design and interrogate complex cellular communities in 3D—with implications for tissue engineering, microtissue mechanics, studies of cellular interactions, and biophysical studies of active matter.

Active matter systems are composed of constituents, each one in nonequilibrium, that consume energy in order to move [1]. A characteristic feature of active matter is collective motion leading to nonequilibrium phase transitions or large scale directed motion [2]. A number of recent works have featured active particles interacting with obstacles, either moving or fixed [3,4,5]. When an active particle encounters an asymmetric obstacle, different behaviours are detected depending on the nature of its active motion. On the one side, rectification effects arise in a suspension of run-and-tumble particles interacting with a wall of funnelled-shaped openings, caused by particles persistence length [6]. The same trapping mechanism could be responsible for the intake of microorganisms in the underground leaves [7] of Carnivorous plants [8]. On the other side, for aligning particles [9] interacting with a wall of funnelled-shaped openings, trapping happens on the (opposite) wider opening side of the funnels [10,11]. Interestingly, when funnels are located on a circular array, trapping is more localised and depends on the nature of the Vicsek model. Active particles can be synthetic (such as synthetic active colloids) or alive (such as living bacteria). A prototypical model to study living microswimmers is P. fluorescens, a rod shaped and biofilm forming bacterium. Biofilms are microbial communities self-assembled onto external interfaces. Biofilms can be described within the Soft Matter physics framework [12] as a viscoelastic material consisting of colloids (bacterial cells) embedded in a cross-linked polymer gel (polysaccharides cross-linked via proteins/multivalent cations), whose water content vary depending on the environmental conditions. Bacteria embedded in the polymeric matrix control biofilm structure and mechanical properties by regulating its matrix composition. We have recently monitored structural features of Pseudomonas fluorescens biofilms grown with and without hydrodynamic stress [13,14]. We have demonstrated that bacteria are capable of self-adapting to hostile hydrodynamic stress by tailoring the biofilm chemical composition, thus affecting both the mesoscale structure of the matrix and its viscoelastic properties that ultimately regulate the bacteria-polymer interactions. REFERENCES [1] C. Bechinger et al. Rev. Mod. Phys. 88, 045006 (2016); [2] T. Vicsek, A. Zafeiris Phys. Rep. 517, 71 (2012); [3] C. Bechinger, R. Di Leonardo, H. Lowen, C. Reichhardt, G. Volpe, and G. Volpe, Reviews of Modern Physics 88, 045006 (2016); [4] R Martinez, F Alarcon, DR Rodriguez, JL Aragones, C Valeriani The European Physical Journal E 41, 1 (2018); [5] DR Rodriguez, F Alarcon, R Martinez, J Ramírez, C Valeriani, Soft matter 16 (5), 1162 (2020); [6] C. O. Reichhardt and C. Reichhardt, Annual Review of Condensed Matter Physics 8, 51 (2017); [7] W Barthlott, S Porembski, E Fischer, B Gemmel Nature 392, 447 (1998); [8] C B. Giuliano, R Zhang, R.Martinez Fernandez, C.Valeriani and L.Wilson (in preparation, 2021); [9] R Martinez, F Alarcon, JL Aragones, C Valeriani Soft matter 16 (20), 4739 (2020); [10] P. Galajada, J. Keymer, P. Chaikin and R.Austin, Journal of bacteriology, 189, 8704 (2007); [11] M. Wan, C.O. Reichhardt, Z. Nussinov, and C. Reichhardt, Physical Review Letters 101, 018102 (2008); [12] J N. Wilking , T E. Angelini , A Seminara , M P. Brenner , and D A. Weitz MRS Bulletin 36, 385 (2011); [13]J Jara, F Alarcón, A K Monnappa, J Ignacio Santos, V Bianco, P Nie, M Pica Ciamarra, A Canales, L Dinis, I López-Montero, C Valeriani, B Orgaz, Frontiers in microbiology 11, 3460 (2021); [14] P Nie, F Alarcon, I López-Montero, B Orgaz, C Valeriani, M Pica Ciamarra

Nature is replete with extraordinary materials that can grow, move, respond, and adapt. In this talk I will describe our ongoing efforts to develop advanced polymeric materials, inspired by nature. First, I will describe my group’s efforts to develop ultrastiff, ultratough materials inspired by the byssal materials of marine mussels. These adhesive contacts allow mussels to secure themselves to rocks, wood, metals and other surfaces in the harsh conditions of the intertidal zone. By developing a foundational understanding of the structure-mechanics relationships and processing of the natural system, we can design high-performance materials that are extremely strong without compromising extensibility, as well as macroporous materials with tunable toughness and strength. In the second half of the talk, I will describe new efforts to exploit light as a means of remote control and power. By leveraging the phototransduction pathways of highly-absorbing, negatively photochromic molecules, we can drive the motion of amorphous polymeric materials as well as liquid flows. These innovations enable applications in packaging, connective tissue repair, soft robotics, and optofluidics.

Intrinsically disordered proteins (IDPs), lack of a well-defined folded structure, have been recently shown to be critical to forming membrane-less organelles via liquid-liquid phase separation (LLPS). Due to the flexible conformations of IDPs, it could be challenging to investigate IDPs with solely experimental techniques. Computational models can therefore provide complementary views at several aspects, including the fundamental physics underlying LLPS and the sequence determinants contributing to LLPS. In this presentation, I will start with our coarse-grained computational framework that can help generate sequence dependent phase diagrams. The coarse-grained model further led to the development of a polymer model with empirical parameters to quickly predict LLPS of IDPs. At last, I will show our preliminary efforts on addressing molecular interactions within LLPS of IDPs using all-atom explicit-solvent simulations.