Solid Mechanics seminars

Heterostructured metals combine soft and hard regions to generate internal mechanical interactions that improve strength and ductility. This talk explains how these architectures outperform conventional alloys and examines ReMade@ARI results on cryogenic deformation. Cascading crystal-defect mechanisms maintain work hardening as deformation proceeds. The same architectures can give bulk metals antimicrobial activity while retaining durability, connecting mechanical performance with public-health functionality. The research considers scalable multifunctional materials for medical devices, water infrastructure, energy systems and cryogenic transport.

Mechanochemical recycling uses collisions in ball mills to create reactive environments within solid plastic feedstocks. Carsten Sievers examines how these environments enable depolymerization and where they impose kinetic and thermodynamic limits. For PET milled with sodium hydroxide, reaction rates depend on interfaces between reactants. Raman microscopy, focused-ion-beam transmission electron microscopy, small-angle X-ray scattering and material-point simulations characterize individual impact craters. Amorphous regions react above a minimum impact force, whereas crystalline regions require impacts exceeding PET’s yield point. Milling polystyrene produces styrene at steady rate and selectivity alongside minor products, including oxygenates. Removing monomer continuously prevents repolymerization, while thermodynamic analysis identifies limits on olefin release from chain-end radicals and motivates more energetic, longer-lived reaction environments. Coupling chain cleavage to hydrogenation or oxidation provides another driving force. An example uses hydrogen peroxide and an iron-oxide catalyst during polyethylene milling, producing oxidation at positions along the backbone followed by carbon-carbon bond cleavage.

This seminar investigates Anderson localization in subwavelength elastic periodic systems with random perturbations. For the unperturbed structure, layer-potential methods recast the eigenvalue problem as boundary integral equations, yielding asymptotic expressions for subwavelength eigenvalues and establishing a band gap above the subwavelength band. A Floquet transform then brings the perturbed problem into a periodic formulation and produces equations for resonant frequencies under general perturbations. Numerical experiments on monomer and dimer structures test agreement with the analysis. Increasing the strength and number of random perturbations demonstrates localization, providing a mathematical basis for elastic metamaterial design.

Sergio Pellegrino studies deployable composite shells for large space solar arrays, where lightweight construction and compact storage are essential. A design explored in Caltech's Space Solar Power Project uses slender cylindrical longerons formed from two circular-arc flanges bonded along an edge. Laminates thinner than 0.1 mm permit tight packaging but make bending behaviour sensitive to local geometric imperfections. The talk examines how the size, shape and distribution of those imperfections explain nonlinear moment–rotation measurements and determine overall bending stiffness, connecting detailed structural analysis with prototype observations. Online via Zoom. Tuesday 29 September 2026 at 12:00 EDT (America/New_York; UTC−4). Organized by ASCE Engineering Mechanics Institute — Stability Committee. Researchers, practitioners and students can use Register for Zoom Link on the organizer's page; the event-specific form requests contact and affiliation details. Attendees must acknowledge the organizer's prohibition on unauthorized recording, transcription and meeting-assistant bots. Pellegrino is a professor at the California Institute of Technology.

Myopia is predicted to affect 50% of all people worldwide by 2050, and is a risk factor for significant, potentially blinding ocular pathologies, such as retinal detachment and glaucoma. Thus, there is significant motivation to better understand the process of myopigenesis and to develop effective anti-myopigenic treatments. In nearly all cases of human myopia, scleral remodeling is an obligate step in the axial elongation that characterizes the condition. Here I will describe the development of a biomechanical assay based on transient unconfined compression of scleral samples. By treating the scleral as a poroelastic material, one can determine scleral biomechanical properties from extremely small samples, such as obtained from the mouse eye. These properties provide proxy measures of scleral remodeling, and have allowed us to identify all-trans retinoic acid (atRA) as a myopigenic stimulus in mice. I will also describe nascent collaborative work on modeling the transport of atRA in the eye.

The eye is a multi-component biological system, where mechanics, optics, transport phenomena and chemical reactions are strictly interlaced, characterized by the typical bio-variability in sizes and material properties. The eye’s response to external action is patient-specific and it can be predicted only by a customized approach, that accounts for the multiple physics and for the intrinsic microstructure of the tissues, developed with the aid of forefront means of computational biomechanics. Our activity in the last years has been devoted to the development of a comprehensive model of the cornea that aims at being entirely patient-specific. While the geometrical aspects are fully under control, given the sophisticated diagnostic machinery able to provide a fully three-dimensional images of the eye, the major difficulties are related to the characterization of the tissues, which require the setup of in-vivo tests to complement the well documented results of in-vitro tests. The interpretation of in-vivo tests is very complex, since the entire structure of the eye is involved and the characterization of the single tissue is not trivial. The availability of micromechanical models constructed from detailed images of the eye represents an important support for the characterization of the corneal tissues, especially in the case of pathologic conditions. In this presentation I will provide an overview of the research developed in our group in terms of computational models and experimental approaches developed for the human cornea.

Living organisms have mastered the dynamic control of stresses within sheets to induce shape transformation and locomotion. For instance, the spatiotemporal pattern of action potential in a heart yields a dynamical stress field leading to shape changes and biological function. Such structures inspired the development of theoretical tools and responsive materials alike. Yet, present attempts to mimic their rich dynamics and phenomenology in autonomous synthetic matter are still very limited. In this talk, I will present several complementing innovations toward this goal: novel shaping mechanisms that were overlooked by previous research, new fabrication techniques for programmable matter via 4D printing of gel structures, and most prominently, the first autonomous shape morphing membranes. The dynamical control over the geometry of the material is a prevalent theme in all of these achievements. In particular, the latter system demonstrates localized deformations, induced by a pattern-forming chemical reaction, that prescribe the patterns of curvature, leading to global shape evolution. Together, these developments present a route for modeling and producing fully autonomous soft membranes mimicking some of the locomotive capabilities of living organisms.

We present new kinematic bending measures and quadratic energies for isotropic elastic plates and shells, with certain desirable features not present in commonly employed models in mechanics and soft matter. These are justified both by simple physical arguments related to the through-thickness variation in strain, and through a detailed reduction from a three-dimensional energy quadratic in stretch. The measure of plate bending is a dilation-invariant surface tensor that couples stretch and curvature in a natural extension of primitive generalized bending strains for straight rods. The extension to naturally-curved rods and shells, for which the pure stretching of a curved rest configuration is not a dilation, contrasts with previous ad hoc postulated forms. Our results provide a clean basis for simple models of low-dimensional elastic systems, and should enable more accurate probing of the structure of singularities in soft sheets and membranes.

Networks of stiff biopolymers are an omnipresent structural motif in cells and tissues. A prominent modeling framework for describing biopolymer network mechanics is rigidity percolation theory. This theory describes model networks as nodes joined by randomly placed, springlike bonds. Increasing the amount of bonds in a network results in an abrupt, dramatic increase in elastic moduli above a certain threshold – an example of a mechanical phase transition. While homogeneous networks are well studied, many tissues are made of disparate components and exhibit spatial fluctuations in the concentrations of their constituents. In this talk, I will first discuss recent work in which we explained the structural basis of the shear mechanics of healthy and chemically degraded cartilage by coupling a rigidity percolation framework with a background gel. Our model takes into account collagen concentration, as well as the concentration of peptidoglycans in the surrounding polyelectrolyte gel, to produce a structureproperty relationship that describes the shear mechanics of both sound and diseased cartilage. I will next discuss the introduction of structural correlation in constructing networks, such that sparse and dense patches emerge. I find moderate correlation allows a network to become rigid with fewer bonds, while this benefit is partly erased by excessive correlation. We explain this phenomenon through analysis of the spatial fluctuations in strained networks’ displacement fields. Finally, I will address our work’s implications for non-invasive diagnosis of pathology, as well as rational design of prostheses and novel soft materials.

The journey of development begins with sperm swimming through the female reproductive tract en-route to the egg. In order to successfully complete this journey sperm must beat a single flagellum, propelling themselves through a wide range of fluids, from liquified semen to viscous cervical mucus. It is well-known that the beating tail is driven by an array of 9 microtubule doublets surrounding a central pair, with interconnecting dynein motors generating shear forces and driving elastic wave propagation. Despite this knowledge, the exact mechanism by which coordination of these motors drives oscillating waves along the flagellum remains unknown; hypothesised mechanisms include curvature control, sliding control, and geometric clutch. In this talk we will discuss the mechanisms of flagellar bending, and present a simple model of active curvature that is able to produce many of the various sperm waveforms that are seen experimentally, including those in low and high viscosity fluids and after a cell has ‘hyperactivated’ (a chemical process thought to be key for fertilization). We will show comparisons between these simulated waveforms and sperm that have been experimentally tracked, and discuss methods for fitting simulated mechanistic parameters to these real cells.

Nature is replete with extraordinary materials that can grow, move, respond, and adapt. In this talk I will describe our ongoing efforts to develop advanced polymeric materials, inspired by nature. First, I will describe my group’s efforts to develop ultrastiff, ultratough materials inspired by the byssal materials of marine mussels. These adhesive contacts allow mussels to secure themselves to rocks, wood, metals and other surfaces in the harsh conditions of the intertidal zone. By developing a foundational understanding of the structure-mechanics relationships and processing of the natural system, we can design high-performance materials that are extremely strong without compromising extensibility, as well as macroporous materials with tunable toughness and strength. In the second half of the talk, I will describe new efforts to exploit light as a means of remote control and power. By leveraging the phototransduction pathways of highly-absorbing, negatively photochromic molecules, we can drive the motion of amorphous polymeric materials as well as liquid flows. These innovations enable applications in packaging, connective tissue repair, soft robotics, and optofluidics.

Microorganisms can swim in a variety of environments, interacting with chemicals and other proteins in the fluid. In this talk, we will highlight recent computational methods and results for swimming efficiency and hydrodynamic interactions of swimmers in different fluid environments. Sperm are modeled via a centerline representation where forces are solved for using elastic rod theory. The method of regularized Stokeslets is used to solve the fluid-structure interaction where emergent swimming speeds can be compared to asymptotic analysis. In the case of fluids with extra proteins or cells that may act as friction, swimming speeds may be enhanced, and attraction may not occur. We will also highlight how parameter estimation techniques can be utilized to infer fluid and/or swimmer properties.

Rigidity is the ability of a system to resist imposed stresses before ultimately undergoing failure. However, disordered materials often contain both rigid and floppy subregions that complicate the utility of taking system-wide averages. I will talk about 3 frameworks capable of connecting the internal structure of disordered materials to their rigidity and/or failure under loading, and describe how my collaborators and I have applied these frameworks to laboratory data on laser-cut lattices and idealized granular materials. These are, in order of increasing physics content: (1) centrality within an adjacency matrix describing its connectivity, (2) Maxwell constraint counting on the full network of frictional contact forces, and (3) the vibrational modes of a synthetic dynamical matrix (Hessian). The first two rely primarily on topology, and the second two contrast the utility of considering interparticle forces (Coulomb failure) vs. the energy landscape. All three methods, while successfully elucidating the origins of rigidity and brittle vs. ductile failure, also provide interesting counterpoints regarding how much information is enough to make predictions.

At small length-scales, capillary effects are significant, and thus the mechanics of soft material interfaces may be dominated by solid surface stresses or liquid surface tensions. The balance between surface and bulk properties is described by an elasto-capillary length-scale, in which equilibrium interfacial energies are constant. However, at small length-scales in biological materials, including living cells and tissues, interfacial energies are not constant but are actively regulated and driven far from equilibrium. Thus, the balance between surface and bulk properties depends upon the distance from equilibrium. Here, we model the spreading (wetting) of living cell aggregates as ‘active droplets’, with a non-equilibrium surface tension that depends upon internal stress generated by the actomyosin cytoskeleton. Depending upon the extent of activity, droplet surface properties adapt to the mechanics of their surroundings. The impact of this adaptation challenges contemporary models of interfacial mechanics, including extensively used models of contact mechanics and wetting.

Multistable structures can reversibly change between multiple stable configurations when a sufficient energetic input is provided. While originally the field focused on understanding what governs the snapping, more recently it has been shown that these systems also provide a powerful platform to design a wide range of smart structures. In this talk, I will first show that pressure-deployable origami structures characterized by two stable configurations provide opportunities for a new generation of large-scale inflatable structures that lock in place after deployment and provide a robust enclosure through their rigid faces. Then, I will demonstrate that the propagation of transition waves in a bistable one-dimensional linkage can be exploited as a robust mechanism to realize structures that can be quickly deployed. Finally, while in the first two examples multistability is harnessed to realize deployable architectures, I will demonstrate that bistable building blocks can also be exploited to design crawling and jumping robots. Unlike previously proposed robots that require complex input control of multiple actuators, a simple, slow input signal suffices to make our system move, as all features required for locomotion are embedded into the architecture of the building blocks.

The dream of programmable matter is to create materials whose physical properties (shape, moduli, response to perturbations, etc.) can be changed on the fly. For many years, my group has been thinking about how to program flat sheets that fold up into three dimensional shapes, most recently by exploiting the principles of origami design. Unfortunately, a combinatorial explosion of folding pathways makes robust folding particularly challenging. In this talk, I will discuss how this pluripotency arises from the topology of the configuration space. This suggests a broader understanding of a larger class of materials spanning from folding forms to spring networks to mechanical structures that perform computational logic.

Diversity in the natural world emerges from the collective behavior of large numbers of interacting objects. Statistical physics provides the framework relating microscopic to macroscopic properties. A fundamental assumption underlying this approach is that we have complete knowledge of the interactions between the microscopic entities. But what if that, even though possible in principle becomes impossible in practice ? Can we still construct a framework for describing their collective behavior ? Dense suspensions and granular materials are two often quoted examples where we face this challenge. These are systems where because of the complicated surface properties of particles there is extreme sensitivity of the interactions to particle positions. In this talk, I will present a perspective based on notions of constraint satisfaction that provides a way forward. I will focus on our recent work on the emergence of elasticity in the absence of any broken symmetry, and sketch out other problems that can be addressed using this perspective.